Carpet and Rug Sanitizer
Vital Oxide is safe for stain protected carpet and fabric finishes, and can be used as a carpet pre-spray, or in tank with hot water vacuum -extraction units.
Its non-ionic formula will not break down acid dye blockers in fiber which helps preserve the colors on your fabrics. Safe for carpet. It works by means of oxidation. Carpet mill tested and approved, leaving your carpet smelling fresh. Highly effective on urine-bacteria and smoke odor. Works as an allergen reducer, effective on mold, dustmites, cockroaches and pet dander.
Spills and spots are inevitable but they do not have to be permanent. The right cleaning solutions can help keep your facility's carpet looking its best between professional deep cleanings. To identify superior performing cleaning products, CRI has developed the Seal of Approval program.
CRI worked with an independent laboratory to test off-the-shelf spot removers and pre-spray solutions. Of the 25 products tested, only four cleaned a soiled carpet sample better than water. Some caused the cleaned carpet area to re-soil faster and — worse — some products damaged the carpet's color and texture. Vital Oxide out preformed all products proving it is a heavy duty odor eliminator removing the strongest, deep set pet odors.
DIRECTIONS - PRE-SPRAY CLEANING
To Sanitize Carpet: For synthetic carpet fibers such as nylon, olefin, or polypropylene – not intended for use on wool carpets. Test for color fastness in an inconspicuous area. Carpet should be clean or free of excessive soil before applying. Mix 1 part product to 5 parts water. Or use full strength. Apply at a rate of 2.5 oz per sq. ft. product must come into contact with contaminate to work. Allow to dwell for 10 minutes. Do not rinse, use an extraction wand and dry stroke carpet to remove excess moisture. Carpet can air dry or fans may be used if carpet needs to dry faster. (For use in extractor machines.)(Including Hoover carpet extractors)
• To Sanitize Carpet: For synthetic carpet fibers such nylon, olefin or polypropylene - not intended for use on wool carpet
• Test for color fastness in a inconspicuous area. Carpet should be cleaned or free of excessive soil before applying. Mix 1 part Vital Oxide to 5 parts water.
• Apply by sprayer at a rate of 1.7 gallons per 10 sq. yards (approx. 22oz per sq. yd.) Vital Oxide must come into contact with contaminate to work.
• Allow to dwell for 10 minutes. Do not rinse, use and extraction wand and dry stroke carpet to remove excess moisture.
• Carpet can air dry, fans may be used if carpet needs to dry faster.
CARPET SANITATION
• Test for color fastness in an inconspicuous area. Carpet should be cleaned or free of excessive soil before applying. Mix 1 part VITAL OXIDE to 5 parts water.
• Apply by sprayer at a rate of 1.7 gallons per 10 sq. yards (approx. 22oz per sq. yd.) VITAL OXIDE must come into contact with contaminate to work.
• Allow to dwell for 60 minutes. Do not rinse, use an extraction wand and dry stroke carpet to remove excess moisture.
• Carpet can air dry or fans may be used if carpet needs to dry faster.